Page Menu

Commercial Connected Thermostat Rebate Form

For Commercial, Industrial, and Agricultural Applications within Vera Water and Power’s service territory. Must comply with all applicable codes and regulations. Rebate not to exceed cost on invoice.

The connected thermostat rebate form (PDF) is available for download.

Eligibility

  • Incentives are for retrofits only.
  • The building is eligible to receive payments for more than 1 thermostat.
  • This measure is not eligible for lodging, 24 hours a day, 7 days a week, occupancy, or semi-conditioned spaces.
  • Connected thermostat projects are not eligible for an ARC payment.
  • Pre-conditions:
    • Heating fuel type of system to be controlled by new thermostat may be electric or gas, and
    • The existing thermostat is not web-enabled.
  • Post-conditions – Initial Install:
    • The installed thermostat controls an existing HVAC supply fan and serves a single zone. “Invisible zones” are permitted (e.g., separate RTUs serving different portions of a large retail space).
    • The installed connected thermostat must be listed on the Connected Thermostat Qualified Products List (QPL).
    • The thermostat must be programmed as follows:
      • Thermostat is connected to the web.
      • Temperature setback is used for unoccupied hours (heating and/or cooling, as applicable).
      • Fan schedule uses auto mode for unoccupied hours (e.g., during unoccupied hours or holidays, the fan will only run when there is a demand for heating or cooling).
      • Override duration set to 3 hours or less.
      • For heat pumps, auxiliary resistance heat lock-out is enabled with appropriate temperature set point.
      • In cases where 2 or more systems serve spaces that are not separated by physical barriers (e.g., “invisible zones”), simultaneous heating and cooling is eliminated (i.e., by having identical temperature set points and schedules with appropriate dead-bands, or through having network-coordinated controls).
    • Post-conditions – Verification Only:
      • The thermostat received a payment for the initial install and was installed after October 1, 2019.
      • The thermostat is eligible for up to 4 verification payments within 2 years of the initial install.
      • A verification payment can be claimed in the same year as the initial install, verification takes place at least 3 months after the initial install.
      • The thermostat is programmed to meet the initial install programming requirements as described above under Initial Install Post-conditions.
      • The thermostat is eligible for a verification payment twice within 1 calendar year. Verification may not be less than 3 months apart.
      • Verification must occur in different seasons.

Commercial Connected Thermostat Rebate Form

This field is for validation purposes and should be left unchanged.

Customer Information & Building Specifics

Your Vera Water and Power account number can be found on your billing statement
Customer Name
Installation street address(Required)
This is the physical location where the energy-efficient appliance was installed
Applicant mailing address
If the mailing address is different than the installation address
Building type
check one

Project Information

Project type
check one
Heating system type
check one

Document Requirements

Use this checklist to help compile documents for submission. For all projects, provide a detailed invoice plus any project-specific back-up documentation listed below.
Equipment or contractor invoice showing
Connected thermostat - initial install
Connected thermostat - verification
Upload your required documentation.
Drop files here or
Max. file size: 512 MB.

    Rebate offer(s) may be changed or discontinued at any time. All warranties are offered through the manufacturer, not the utility, whether expressed or implied, regarding the product(s) listed above for any materials or labor associated with installation, maintenance, repair, or any energy savings associated with use. Rebate offer(s) apply to new product(s) only. Utility reserves the right to inspect installed product(s). Product(s) must meet all program criteria to qualify for rebate(s).